Copyright Sansei, Inc. All rights reserved. 

220 South Rock Boulevard #12, RenoNV 89502, USA

Wild cherry



Piano finish (white)

Piano finish (black)


The Stamp SE is available with ten different housing surfaces in aluminium, real wood veneer or piano finish.

Aluminium (silver)

Aluminium (black)




The Stamp SE is a compact, trend-setting stereo amplifier which has caused a sensation in the audiophile world because of its impressive sound, combined with the high-class design of our attractive Linear SE. With its small size and the elegant housing variations it’s an antithesis to the clumsy power amp giants.

Whether it’s the calm in life’s stormy weather or a change in your daily routine, be they merry or melancholic notes: your music will always give you what’s just right for you at any given moment. Here our Stamp SE would like to spoil you with an impressive sound which goes deep under your skin. Besides the acoustic top performance our compact amplifier can also put an elegant, customisable design in the balance.

Like all our devices, the Stamp SE is manufactured in Germany with utmost care and fitted with premium components. For the next generation of our well-known Stamp we use capacitors from Mundorf in the signal path and an ahp microfuse. The former provide a greatly improved transient behaviour and spatial representation of your favourite sounds. SSC feet and a thicker housing wall gauge help dampen vibrations and microphonic effects. You’d rather assure yourself first-hand of the audible advancements. In addition, the technical overall picture is rounded out by the high-quality interior wiring from Mogami.

An experience for all your senses?

The super compact Stamp SE delivers up to 2 x 20 W into 4 ohms. Loudspeakers with a sensitivity greater than 87 dB/1 W are perfect matches for this amplifier. Teamed with our Linear SE, the result is a puristic pre/power amp combo that’s going to give you an all new listening experience and even a true eye candy on top.

Due to the variants of the housing created by product designer Guido Gutenstein, the Stamp SE lives up to the highest aesthetic demands. These range from silk flat aluminium with a noble visusal appearance to high-gloss piano lacquer finish to high-grade real wood veneers. The manifold refinement options allow you to create your very personal high-end gem.

Technical Data

The impressing technical details of the Stamp SE.

Frequency response 12 Hz – 20000 Hz +/- 1 dB at 4 ohms
Gain 20 dB
Max. power 20 W per channel at 4 ohms
Outer dimensions W x D x H 120 mm x 296 mm x 59 mm
Weight 2.75 kg

Technical Data

The impressing technical details of the Stamp.

Frequency response 12 Hz – 20000 Hz +/- 1 dB at 4 ohms
Gain 20 dB
Max. power 20 W per channel at 4 ohms
Outer dimensions W x D x H 110 mm x 280 mm x 44 mm
Weight 1.9 kg

This stereo power amplifier convinces with its inner values: music lovers are raving about the excellent sound quality of our Stamp. And with its compact dimensions it astonishes the audiophile world. Instead of another power amp behemoth, we present to you this more than serious amplifier which can stand its ground everywhere despite – or just because of – its size.
Even if you’re the owner of small, trendy loudspeakers or listen to music over your second sound system, you may expect a lush and uniquely pure sound. The Stamp will allow you to do just this without pushing itself visually or soundwise into the limelight.

"The Stamp I can recommend wholeheartedly. As long as you are realistic with room/speaker matching it offers true hi-? sound."
— TNT Audio

A cutting-edge power amp?
Like all our devices, the Stamp will leave Lehmannaudio with first-class components which produce a uniquely faithful and fascinating sound. Among others, we use components from Nippon Chemicon, BC Components and Epcos. To guarantee a low-loss current delivery capability, we apply a 105 µm copper layer on either side of the double-sided pc board.
The internal audio wiring is fully solid-core. It is directly soldered to the sockets and the pc board to avoid additional plug-in connections. The oversized, linear power suppy is fed by a magnetically and statically shielded toroidal mains transformer. Measuring only 280 x 115 x 42 mm the Stamp delivers up to 2 x 20 W into 4 ohms. Loudspeakers with a sensitivity greater than 87 dB/1 W turn out to be perfect matches.
Setup of this refreshingly different power amplifier is a snap: thanks to its modest size, you can put it right next to your chain. Using the optional mounting kit you can also attach it quite easily wherever it fits best for you – e.g. under your desktop or on a wall. ?By the way, if your speakers have bi-amping terminals, you can reconfigure the Stamp in a breath. For bi-amping operation you’ll need two Stamp power amps. When combined with our Linear, you’ll get a puristic pre/power amp combination that is going to thrill you.